4 TIPS TO PREVENT ELECTRICAL FIRES
Preventing a fire seems easy enough, right? We could sum up a
fire prevention course in just a few quick tips: Don’t leave the stove on,
unplug the curling irons, move the grill away from the house, and don’t leave
the kitchen while cooking. Done. Check. Fire
prevented. Of course, there are honest mistakes to each of these guidelines,
but we all know what not to do. However, every once in a while, you’ll read a
news article or see a Facebook post about an electrical fire. You get a little
nervous as you think, “That was a rare case. It won’t happen to me.” Well, no
one expects a disaster until it happens. For this reason, we’ve compiled some
points that will help you understand the nature of electrical fires and offer
suggestions for preventing them.
- Examine
your Outlets
Ungrounded electrical outlets can be a cause of flying sparks
and high electric charge. There’s an easy way to determine what type of outlets
you have. Three-prong outlets have a third slot or “ground slot” to act as an
escape route if a power surge were to occur. Two-prong outlets are considered
unsafe because they are ungrounded. If your home does not have grounded
outlets, you can call a professional for an upgrade. The switch costs about
$80-150 per outlet. In newer homes, having grounded outlets is necessary to
pass inspection.
- Check
the Wiring
Faulty wiring is a leading cause of electrical wires. In homes
over 20 years old, the wiring system is set up a little differently than modern
standards. Since wiring is behind walls and hard to self-check, there are a few
quick things to watch for:
- Regular
power outages and surges
- Excessive
heat when using appliances and electronics
- Outlets
that spark and shock frequently
- Consistently
overloaded circuit breakers
If any of these signs look familiar to you (maybe you could even
add a few more to the list) than it is time to call an electrician and get your
wiring inspected.
- Get
the Right Light
Here’s a strict one: Don’t exceed the wattage limit in light
fixtures. A light socket calls for 60 watts max? Great. 60 watts is the cap.
Going above may initially sound like a problem-solver, but it can lead to
scorching heat, a melted light socket, and damaged internal wires. It’s the
perfect storm for an electrical fire.
- Use
Heaters Appropriately
Without too much thought, a nice and cozy stream of air from a
space heater can quickly turn into a blazing electrical fire. Placement is key
when it comes to space heaters. Since the internal coils in these heaters can
quickly ignite curtains, furniture, bedsheets, and clothing, it is wise to
maintain a distance of a few feet with flammable items. Failure to do this may
result in more heat than you bargained for. In fact, the U.S. Department of
Energy reported that over 25,000 residential fires began with space
heaters. To avoid becoming a space heater statistic, tell your family about
their dangers and how to use them safely.
- Know
your Cords
Bad cords are an easy fix because they’re visible to the eye.
Using cords correctly can prevent an electrical fire and
subsequent fire damage. Here’s a few do’s and don’ts when it comes to cords:
- Use
extension cords as a temporary solution.
- Don’t
run electrical cords beneath the carpet.
- Keep
electrical sources far away from water.
- Discard
well-worn or frayed cords.
Comments
Post a Comment